You are browsing a read-only backup copy of Wikitech. The primary site can be found at wikitech.wikimedia.org
Platform-specific documentation/Sun Fire V20z/V40z
The V20z is a 1U rack server, the V40z is 3U.
- pascal, vandale, zedler (toolserver)
- mint, fuchsia, lily, hawthorn, mayflower, iris, clematis, sage, ragweed
- Up to two/four Opteron sockets
- Two Gigabit ports
- Supports Sun IPMI Service Processor
Lights Out Management
Connect to hostname.ipmi.knams from within KNAMS.
Log in with SSH and use the command
Disconnect from the console with
Ctrl-E c .
If the console is used by someone else, you'll get a read only session. To disconnect the other session and get a read/write session, type
Ctrl-E c f
To reboot a server, log in with SSH and use the command
platform set power state cycle
If it won't, try
platform set power state -W -f off
You can check that it's off with
platform get power state
Then you can power it back on with
platform set power state -W -f on