You are browsing a read-only backup copy of Wikitech. The live site can be found at wikitech.wikimedia.org
After re-categorizing the Echo notifications, the Collaboration team realized we still needed to update Alerts/Messages to Alerts/Notices. Moriel put together a patch for this, and I monitored SWAT for it. The i18n changes did not deploy properly, causing noticeable user impact (phab:T139712), so followup was needed.
See also. Times in UTC.
- An Echo patch were was initially listed for 07/07/16 evening SWAT (23:00) (there was also a Flow change in the same SWAT, which is not relevant to this incident report)
- [wmf.9] [Echo] "Change 'messages' to 'notices' throughout the interface". This had new i18n messages.
- We soon realized this needed a followup, so we added (with Dereckson's OK):
- [wmf.9] [Echo] "Followup Ib7f4dc4ea: Bring back message tooltip with 'notice' text"
- 07/08/16 00:27 - <icinga-wm> PROBLEM - Disk space on terbium is CRITICAL: DISK CRITICAL - free space: / 2550 MB (3% inode=79%)
- 07/08/16 01:02 - Echo change was live on mw1017, but this did not include the second one
- 07/08/16 01:17 - Second Echo change live on mw1017. Neither could be tested on mw1017, since new i18n messages are not testable there.
- 07/08/16 01:20 - <logmsgbot> !log dereckson@tin Started scap: Flow 297914, Echo 297919 297934, ORES 297916
- 07/08/16 01:48 - <logmsgbot> !log dereckson@tin Finished scap: Flow 297914, Echo 297919 297934, ORES 297916 (duration: 27m 48s)
- 07/08/16 01:54 - <mutante> !log terbium ran out of disk, deleted rotated nutcracker log
- 07/08/16 01:55 - Just over 5 minutes after scap, ResourceLoader messages for Echo have missing messages: "<matt_flaschen> Dereckson, i18n is not working.". This causes very noticeable user impact.
- 07/08/16 01:57 <Dereckson> matt_flaschen: expected, we had an issue during the scap
- 07/08/16 01:57 <Dereckson> let's run l10nupdate
- 07/08/16 01:58 <Dereckson> Starting l10nupdate at Fri Jul 8 01:57:58 UTC 2016.
- 07/08/16 01:59 <Dereckson> matt_flaschen: so, Terbium ran out of disk space on the partition needed by the l10n update part
- 07/08/16 02:05 <Dereckson> I'm trying again l10nupdate, if it fails, we'll sync-l10nupdate manually only for Echo
- 07/08/16 02:29 Krinkle verifies that direct access to the i18n messages (via shell) is now working.
- 07/08/16 02:32 <Krinkle> matt_flaschen: Dereckson: Most likely what happened is that new l10n cache rolled out, during this part someone requested 'startup' manifest from a server with the new l10n cache values. This server responded with a module version that includes the new messages (and working). Then another request comes in (to an older server this time) responding to a request for Echo JS with the new version in the query string. It responds without the message as it doesn't have it yet. Then, the l10n sync completes, but the new url is now populated in varnish so it won't repair itself
- 07/08/16 02:37 <Krinkle> Dereckson: Yeah, if l10n update was not synced at all, and is being synced now, then the problem wasn't cache poisoning. It was just missing and the version number of the broken version was of the broken version.
- 07/08/16 02:42 Working
The initial scap log makes it seem that l10n-update succeeded, and only terbium failed. However, either:
- The exhausted disk space did cause the initial scap to fail (but the log is not clear about this), and Varnish cached the broken version of ResourceLoader-served messages during this time.
- There was an unrelated i18n race condition.
Explicit next steps to prevent this from happening again as much as possible, with Phabricator tasks linked for every step.
- Status: Unresolved Avoid excessive log retention on terbium bug T139786
- Status: Unresolved Need to set up terbium disk space monitoring at proper levels, and act on it.
- Status: Unresolved Document if strings are available from PHP, but not from JS, we need to refresh the ResourceLoader cache. This can be done running