You are browsing a read-only backup copy of Wikitech. The live site can be found at wikitech.wikimedia.org

Difference between revisions of "Switch Datacenter"

From Wikitech-static
Jump to navigation Jump to search
imported>Alexandros Kosiaris
(Add note about making sure the central notice banner is removed)
imported>Quiddity
(→‎Upcoming and past switches: pluralize sub-section titles, remove month from 2021 subtitle (I got confused looking for the Sept date!))
(25 intermediate revisions by 10 users not shown)
Line 2: Line 2:


== Introduction ==
== Introduction ==
A datacenter switchover (from eqiad to codfw, or vice-versa) comprises switching over multiple different components, some of which can happen independently and many of which need to happen in lockstep. This page documents all the steps needed to switch over from a master datacenter to another one, broken up by component.
A datacenter switchover (from eqiad to codfw, or vice-versa) comprises switching over multiple different components, some of which can happen independently and many of which need to happen in lockstep. This page documents all the steps needed to switch over from a master datacenter to another one, broken up by component. SRE Service Operations maintains the process and software necessary to run the switchover.


=== Schedule for 2018 switch ===
__TOC__
 
== Weeks in advance preparation ==
 
* 10 weeks before: Coordinate dates and communication plan with involved groups: [[Switch_Datacenter/Coordination]]
* 3 weeks before: Run a "live test" of the cookbooks by "switching" from the passive DC to the active DC. The <code>--live-test</code> flag will skip actions that could harm the active DC or do them on the passive DC. This will instrument most of the code paths used in the switchover and help identify issues. This process will !log to SAL so you should coordinate with others, but otherwise should be non-disruptive. Due to changes since the last switchover you can expect code changes to become necessary, so take the time and assistance needed into account.


* Services: Tuesday, September 11th 2018 14:30 UTC
== Overall switchover flow ==
*Media storage/Swift: Tuesday, September 11th 2018 15:00 UTC
In a controlled switchover we first deactivate services in the primary datacenter and  second deactivate caching in the datacenter. The next step is to switch Mediawiki itself. About a week later we activate caching in the datacenter again, as we believe that testing the situation without caching in the datacenter is sufficient.
*Traffic: Tuesday, September 11th 2018 19:00 UTC
*<mark>MediaWiki: Wednesday, September 12th 2018: 14:00 UTC</mark>


'''Switching back:'''
Typical scheduling looks like:
* Traffic: Wednesday, October 10th 2018 09:00 UTC
* Monday 14:00 UTC Services
*<mark>MediaWiki: Wednesday, October 10th 2018: 14:00 UTC</mark>
* Monday 15:00 UTC Caching (traffic)
*Services: Thursday, October 11th 2018 14:30 UTC
* Tuesday 14:00 UTC Mediawiki
*Media storage/Swift: Thursday, October 11th 2018 15:00 UTC


__TOC__
The following week reactivate caching. 6+ Weeks later switchback Mediawiki


== Per-service switchover instructions ==
== Per-service switchover instructions ==
=== MediaWiki ===
=== MediaWiki ===
We divide the process in logical phases that should be executed sequentially. Within any phase, top-level tasks can be executed in parallel to each other, while subtasks are to be executed sequentially to each other. The phase number is referred to in the names of the tasks in the [[gerrit:plugins/gitiles/operations/cookbooks/|operations/cookbooks]] repository, in the[[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/|cookbooks/sre/switchdc/mediawiki/]] path.
We divide the process in logical phases that should be executed sequentially. Within any phase, top-level tasks can be executed in parallel to each other, while subtasks are to be executed sequentially to each other. The phase number is referred to in the names of the tasks in the [[gerrit:plugins/gitiles/operations/cookbooks/|operations/cookbooks]] repository, in the [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/|cookbooks/sre/switchdc/mediawiki/]] path.
 
 


==== Days in advance preparation ====
==== Days in advance preparation ====
# '''OPTIONAL: SKIP IN AN EMERGENCY''': Make sure databases are in a good state. Normally this requires no operation, as the passive datacenter databases are always prepared to receive traffic, so there are no actionables. Some things that #DBAs normally should make sure for the most optimal state possible (sanity checks):
# '''OPTIONAL: SKIP IN AN EMERGENCY''': Make sure databases are in a good state. Normally this requires no operation, as the passive datacenter databases are always prepared to receive traffic, so there are no actionables. Some things that #DBAs normally should make sure for the most optimal state possible (sanity checks):
#* There is no ongoing long-running maintenance that affects database availability or lag (schema changes, upgrades, hardware issues, etc.). Depool those servers that are not ready.
#* There is no ongoing long-running maintenance that affects database availability or lag (schema changes, upgrades, hardware issues, etc.). Depool those servers that are not ready.
#* Replication is flowing from eqiad -> codfw and from codfw -> eqiad (sometimes replication gets stopped in the passive -> active direction to facilitate maintenance)
#* Replication is flowing from eqiad -> codfw and from codfw -> eqiad (replication is usually stopped in the passive -> active direction to facilitate maintenance)
#* All database servers have its buffer pool filled up. This is taken care automatically with the [[MariaDB/buffer_pool_dump|automatic buffer pool warmup functionality]]. For sanity checks, some sample load could be sent to the mediawiki application server to check requests happen as quickly as in the active datacenter.
#* All database servers have its buffer pool filled up. This is taken care automatically with the [[MariaDB/buffer pool dump|automatic buffer pool warmup functionality]]. For sanity checks, some sample load could be sent to the MediaWiki application server to check requests happen as quickly as in the active datacenter.
#* These where the [[Switch_Datacenter/planned_db_maintenance#2018_Switch_Datacenter|things we prepared/checked for the 2018 switch]]
#* These were the [[Switch Datacenter/planned db maintenance#2018 Switch Datacenter|things we prepared/checked for the 2018 switch]]
# Prepare puppet patches:
#* Switch cache::app_directors backends from old_site-active to new_site-active ([https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458772/ eqiad->codfw]; [https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458773/ codfw->eqiad] )
# Make absolutely sure that parsercache replication is working from the active to the passive DC. '''This is important'''
# Make absolutely sure that parsercache replication is working from the active to the passive DC. '''This is important'''
#Check appserver weights on servers in the passive DC, make sure that newer hardware is weighted higher (usually 30) and older hardware is less (usually 25)


==== Phase 0 - preparation ====
==== Phase 0 - preparation ====
# Disable puppet on maintenance hosts and cache::text in both eqiad and codfw: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/00-disable-puppet.py|00-disable-puppet.py]]
# Disable puppet on maintenance hosts in both eqiad and codfw: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/00-disable-puppet.py|00-disable-puppet.py]]
# Reduce the TTL on <tt>appservers-rw, api-rw, jobrunner, videoscaler</tt> to 10 seconds: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/00-reduce-ttl.py|00-reduce-ttl.py]] For operational reasons to be able to run multiple steps one after the other, this step doesn't wait the old TTL (300s) to expire. '''Make sure that at least 5 minutes have passed before moving to Phase 1'''.
# Reduce the TTL on <code>appservers-ro, appservers-rw, api-ro, api-rw, jobrunner, videoscaler, parsoid-php</code> to 10 seconds: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/00-reduce-ttl.py|00-reduce-ttl.py]] The warmup step (below) typically takes longer than the old TTL (5 minutes) so this step doesn't wait it to expire. '''Make sure that at least 5 minutes have passed before moving to Phase 1, the cookbook should force you to wait'''.
# Warm up APC running the mediawiki-cache-warmup on the new site clusters. Run it 3 (three) times: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/00-warmup-caches.py|00-warmup-caches.py]]  
# Warm up APC running the mediawiki-cache-warmup on the new site clusters. The warmup queries will repeat automatically until the response times stabilize: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/00-warmup-caches.py|00-warmup-caches.py]]  
#* The global warmup against the appservers cluster
#* The global "urls-cluster" warmup against the appservers cluster
#* The apc-warmup against all hosts in the appservers cluster.
#* The "urls-server" warmup against all hosts in the appservers cluster.
# Set downtime for Read only checks on mariadb masters changed on Phase 3 (they will complain after the etcd primary master changes and until puppet runs there)
#*The "urls-server" warmup against all hosts in the api-appservers cluster.
# Set downtime for Read only checks on mariadb masters changed on Phase 3 so they don't page. '''This is not covered by the switchdc script.'''


==== Phase 1 - stop maintenance and merge traffic changes ====
==== Phase 1 - stop maintenance ====
# Stop maintenance jobs in the ''active site'' and kill all the cronjobs on the maintenance host in the active site: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/01-stop-maintenance.py|01-stop-maintenance.py]]
# Stop maintenance jobs in both datacenters and kill all the periodic jobs (systemd timers and cronjobs) on all maintenance host in both datacenters: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/01-stop-maintenance.py|01-stop-maintenance.py]]
#Merge and puppet-merge the traffic change for text caches [https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458772/ eqiad->codfw]; [https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458773/ codfw->eqiad]. '''This is not covered by the switchdc script'''. Note: This does not yet switch traffic since puppet is disabled. Please use the following to SAL log <code>!log Phase 1.2 - merge traffic switching puppet change.</code>


==== Phase 2 - read-only mode ====
==== Phase 2 - read-only mode ====
Line 49: Line 52:


==== Phase 3 - lock down database masters ====
==== Phase 3 - lock down database masters ====
# Put old-site core DB masters (shards: s1-s8, x1, es2-es3) in read-only mode and wait for the new site's databases to catch up replication: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/03-set-db-readonly.py|03-set-db-readonly.py]]
# Put old-site core DB masters (shards: s1-s8, x1, es4-es5) in read-only mode and wait for the new site's databases to catch up replication: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/03-set-db-readonly.py|03-set-db-readonly.py]]


==== Phase 4 - switch active datacenter configuration ====
==== Phase 4 - switch active datacenter configuration ====


# Send the traffic layer to active-active: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/04-switch-traffic.py|04-switch-traffic.py]]
#* enable and run puppet on cache::text in $new_site. This starts the active-active traffic phase (traffic will  go to both MW clusters)
#* ensure that the change was applied on all hosts in $new_site
#* Run puppet on the text caches in $old_site. This ends the active-active phase.
# Switch the discovery records and MediaWiki active datacenter: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/04-switch-mediawiki.py|04-switch-mediawiki.py]]  
# Switch the discovery records and MediaWiki active datacenter: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/04-switch-mediawiki.py|04-switch-mediawiki.py]]  
#* Flip <tt>appservers-rw, api-rw, jobrunner, videoscaler</tt> to <tt>pooled=true</tt> in the new site. This will not actually change the DNS records for the active datacenter.
#* Flip <code>appservers-ro, appservers-rw, api-ro, api-rw, jobrunner, videoscaler, parsoid-php</code> to <code>pooled=true</code> in the new site. Since both sites are now pooled in etcd, this will not actually change the DNS records for the active datacenter.
#* Flip <code>WMFMasterDatacenter</code> from the old site to the new.
#* Flip <code>WMFMasterDatacenter</code> from the old site to the new.
#* Flip <tt>appservers-rw, api-rw, jobrunner, videoscaler</tt> to <tt>pooled=false</tt> in the old site. After this, DNS will be changed for the old DC and internal applications (but mediawiki!!) will start hitting the new DC
#* Flip <code>appservers-ro, appservers-rw, api-ro, api-rw, jobrunner, videoscaler, parsoid-php</code> to <code>pooled=false</code> in the old site. After this, DNS will be changed for the old DC and internal applications (except mediawiki) will start hitting the new DC


==== Phase 5 - Invert Redis replication for MediaWiki sessions ====
==== Phase 5 - Invert Redis replication for MediaWiki sessions ====
Line 67: Line 66:


==== Phase 6 - Set new site's databases to read-write ====
==== Phase 6 - Set new site's databases to read-write ====
# Set new-site's core DB masters (shards: s1-s8, x1, es2-es3) in read-write mode: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/06-set-db-readwrite.py|06-set-db-readwrite.py]]
# Set new-site's core DB masters (shards: s1-s8, x1, es4-es5) in read-write mode: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/06-set-db-readwrite.py|06-set-db-readwrite.py]]


==== Phase 7 - Set MediaWiki to read-write ====
==== Phase 7 - Set MediaWiki to read-write ====
Line 74: Line 73:
==== Phase 8 - post read-only ====
==== Phase 8 - post read-only ====


# Restart Envoy on the jobrunners that are now inactive, to trigger changeprop to re-resolve the DNS name and connect to the new DC: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/08-restart-envoy-on-jobrunners.py|08-restart-envoy-on-jobrunners.py]]
#*A steady rate of 500s is expected until this step is completed, because changeprop will still be sending edits to jobrunners in the old DC, where the database master will reject them.
# Start maintenance in the new DC: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/08-start-maintenance.py|08-start-maintenance.py]]
# Start maintenance in the new DC: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/08-start-maintenance.py|08-start-maintenance.py]]
## Run puppet on the maintenance hosts
#* Run puppet on the [[Maintenance_server|maintenance hosts]], which will reactivate systemd timers in both datacenters and add cronjobs in the primary DC
# Update tendril for new database masters: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/08-update-tendril.py|08-update-tendril.py]] Pure cosmetic change, no effect on production. No changes required for database zarcillo (which has a different master for eqiad and codfw).
#*Most Wikidata-editing bots will restart once this is done and the "[https://grafana.wikimedia.org/d/TUJ0V-0Zk/wikidata-alerts?orgId=1&refresh=5s dispatch lag]" has recovered. This should bring us back to 100% of editing traffic.
# Update tendril for new database masters: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/08-update-tendril.py|08-update-tendril.py]]  
#*Pure cosmetic change, no effect on production. No changes required for database zarcillo (which has a different master for eqiad and codfw).
#*The parsercache hosts and x2 will need to manually be updated in tendril see [[phab:T266723|T266723]]. '''This is not covered by the switchdc script.'''
# Set the TTL for the DNS records to 300 seconds again: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/08-restore-ttl.py|08-restore-ttl.py]]
# Set the TTL for the DNS records to 300 seconds again: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/08-restore-ttl.py|08-restore-ttl.py]]
# Update DNS records for new database masters deploying [https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458787/ eqiad->codfw]; [https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458790/ codfw->eqiad] '''This is not covered by the switchdc script'''. Please use the following to SAL log <code>!log Phase 8.4 Update DNS records for new database masters</code>
# Update DNS records for new database masters deploying [https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458787/ eqiad->codfw]; [https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458790/ codfw->eqiad] '''This is not covered by the switchdc script'''. Please use the following to SAL log <code>!log Phase 8.5 Update DNS records for new database masters</code>
# Run Puppet on the database masters in both DCs, to update expected read-only state: [[gerrit:plugins/gitiles/operations/cookbooks/+/master/cookbooks/sre/switchdc/mediawiki/08-run-puppet-on-db-masters.py|08-run-puppet-on-db-masters.py]].
# Make sure the CentralNotice banner informing users of readonly is removed. Keep in mind, there is some minor HTTP caching involved (~5mins)
# Make sure the CentralNotice banner informing users of readonly is removed. Keep in mind, there is some minor HTTP caching involved (~5mins)
# Remove the downtime added in phase 0.
#Update [[git:operations/puppet/+/refs/heads/production/modules/profile/files/configmaster/disc desired state.py|disc_desired_state.py]] to reflect which services are pooled in which DCs. See [[phab:T286231|T286231]] as an example. '''This is not covered by the switchdc script.'''


==== Phase 9 - verification and troubleshooting ====
==== Phase 9 - verification and troubleshooting ====
Line 89: Line 96:
==== Dashboards ====
==== Dashboards ====


*[https://grafana.wikimedia.org/dashboard/db/apache-hhvm?orgId=1 Apache/HHVM]
*[https://grafana.wikimedia.org/d/000000327/apache-fcgi?orgId=1 Apache/FCGI]
*[https://grafana.wikimedia.org/dashboard/db/mediawiki-application-servers?orgId=1 App servers]
*[https://grafana.wikimedia.org/dashboard/db/mediawiki-application-servers?orgId=1 App servers]
*[https://grafana.wikimedia.org/dashboard/db/prometheus-varnish-dc-stats?orgId=1&var-datasource=eqiad%20prometheus%2Fops&var-cluster=cache_upload&var-layer=backend Varnish backends]
*[https://grafana.wikimedia.org/d/kHk7W6OZz/ats-cluster-view?orgId=1&var-datasource=esams%20prometheus%2Fops&var-layer=backend&var-cluster=text ATS cluster view (text)]
*[https://logstash.wikimedia.org/app/kibana#/dashboard/Fatal-Monitor Fatalmonitor (mostly mediawiki logs)]
*[https://grafana.wikimedia.org/d/1T_4O08Wk/ats-backends-origin-servers-overview?orgId=1&var-datasource=esams%20prometheus%2Fops&var-cluster=text&var-origin=api-rw.discovery.wmnet&var-origin=appservers-rw.discovery.wmnet&var-origin=restbase.discovery.wmnet ATS backends<->Origin servers overview (appservers, api, restbase)]
*[https://logstash.wikimedia.org/app/kibana#/dashboard/mediawiki-errors MediaWiki errors]
*[https://logstash.wikimedia.org/app/kibana#/dashboard/87348b60-90dd-11e8-8687-73968bebd217 Database Errors logs]
*[https://logstash.wikimedia.org/app/kibana#/dashboard/87348b60-90dd-11e8-8687-73968bebd217 Database Errors logs]


=== Media storage/Swift ===
=== Media storage/Swift ===
==== Switchover ====
==== Switchover ====
 
{{Outdated-inline|note=swiftrepl will now only run in the active datacenter, automatically: [[phab:T285373|T285373]]. (This section will be removed post-switchover)}}
* Set temporary active/active for Swift
Cache-wise, Swift is active-active. However the background synchronization <code>swiftrepl</code> needs to run in what Mediawiki considers the primary datacenter. A patch such as {{Gerrit|622522}} accomplishes this and needs to be merged after Mediawiki has been switched over (up to e.g. 24/48 hours later is acceptable)
# gerrit: C+2 and Submit commit https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458794
# <any puppetmaster>: <code>puppet-merge</code>
# <any cumin master>: <code>sudo cumin 'A:cp-upload_eqiad or A:cp-upload_codfw' 'run-puppet-agent'</code>
# SAL log using <code>!log Media storage/Swift Swift set to active/active</code>
* The above must complete correctly and fully (applying the change)
* Set Swift to active/passive in codfw only:
# gerrit: C+2 and Submit commit https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458795
# <any puppetmaster>: <code>puppet-merge</code>
# <any cumin master>: <code>sudo cumin 'A:cp-upload_eqiad or A:cp-upload_codfw' 'run-puppet-agent'</code>
# SAL log using <code>!log Media storage/Swift Swift set to active/passive</code>


==== Switching back ====
==== Switching back ====


Repeat the steps above in reverse order with the commits https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458796 and https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458797 respectively
Revert {{Gerrit|622522}} to move <code>swiftrepl</code> back to eqiad


==== Dashboards ====
==== Dashboards ====
* [https://grafana.wikimedia.org/dashboard/file/swift.json?orgId=1 Swift eqiad]
* [https://grafana.wikimedia.org/d/OPgmB1Eiz/swift?orgId=1&var-DC=eqiad&var-prometheus=eqiad%20prometheus%2Fops Swift eqiad]
* [https://grafana.wikimedia.org/dashboard/file/swift.json?orgId=1&var-DC=codfw Swift codfw]
* [https://grafana.wikimedia.org/d/OPgmB1Eiz/swift?orgId=1&var-DC=codfw&var-prometheus=codfw%20prometheus%2Fops Swift codfw]
* [https://grafana.wikimedia.org/dashboard/db/thumbor?orgId=1 Thumbor]
* [https://grafana.wikimedia.org/dashboard/db/thumbor?orgId=1 Thumbor]
* [https://grafana.wikimedia.org/d/kHk7W6OZz/ats-cluster-view?orgId=1&var-datasource=esams%20prometheus%2Fops&var-layer=backend&var-cluster=upload ATS cluster view (upload)]
* [https://grafana.wikimedia.org/d/1T_4O08Wk/ats-backends-origin-servers-overview?orgId=1&var-datasource=esams%20prometheus%2Fops&var-cluster=upload&var-origin=swift.discovery.wmnet ATS backends<->Origin servers overview (swift)]


=== ElasticSearch ===
=== ElasticSearch ===
==== General context on how to switchover ====


CirrusSearch talks by default to the local datacenter ($wmfDatacenter). If Mediawiki switches datacenter, elasticsearch will automatically follow.
CirrusSearch talks by default to the local datacenter (<code>$wmfDatacenter</code>). If Mediawiki switches datacenter, elasticsearch will automatically follow.


Manually switching CirrusSearch to a specific datacenter can always be done. Point CirrusSearch to codfw by editing wmgCirrusSearchDefaultCluster [https://github.com/wikimedia/operations-mediawiki-config/blob/master/wmf-config/InitialiseSettings.php#L16025-L16027 InitialiseSettings.php].
Manually switching CirrusSearch to a specific datacenter can always be done. Point CirrusSearch to codfw by editing <code>wmgCirrusSearchDefaultCluster</code> [https://github.com/wikimedia/operations-mediawiki-config/blob/master/wmf-config/InitialiseSettings.php#L16025-L16027 InitialiseSettings.php].


To ensure coherence in case of lost updates, a reindex of the pages modified during the switch can be done by following [[Search#Recovering_from_an_Elasticsearch_outage.2Finterruption_in_updates|Recovering from an Elasticsearch outage / interruption in updates]].
To ensure coherence in case of lost updates, a reindex of the pages modified during the switch can be done by following [[Search#Recovering_from_an_Elasticsearch_outage.2Finterruption_in_updates|Recovering from an Elasticsearch outage / interruption in updates]].


==== Dashboards ====
==== Preserving more_like query cache performance ====
* [https://grafana.wikimedia.org/dashboard/db/elasticsearch-percentiles-prometheus?orgId=1 ElasticSearch Percentiles]
 
CirrusSearch has a caching layer that caches the result of Elasticsearch queries such as "more like this" queries (which are used, among other things, to generate "Related Articles" at the bottom of mobile Wikipedia pages).
 
Switching datacenters will result in degraded performance while the cache fills back up.
 
In order to avoid the aforementioned performance degradation, a mitigation should be deployed that will hardcode <code>more_like</code> queries to keep routing to the "old" datacenter for 24 hours following the switchover.
 
Hardcoding the cirrus cluster will allow the stampede of cache misses to be sent to the secondary search cluster which has enough capacity, once typical traffic has migrated to the new datacenter, to serve the increased load.


=== Traffic ===
This hardcoding should be deployed in advance of the switchover. Since it is effectively a no-op until the actual cutover, it can be deployed as far in advance as desired.


==== General information on generic procedures ====
For example, if we are switching over from eqiad to codfw, <code>more_like</code> queries should be hardcoded to route to eqiad; this change should be deployed before the actual cutover.


https://wikitech.wikimedia.org/wiki/Global_Traffic_Routing
Then, 24 hours after the cutover, the hardcoding can be removed, allowing <code>more_like queries</code> to route to the ''new'' cirrus dc - in this example, codfw.


==== Switchover ====
===== Days in advance preparation =====


Inter-Cache Routing:
Deploy a patch to hardcode more_like query routing to the currently active DC (i.e. the datacenter we are switching over ''from'').
# gerrit: C+2 and Submit commit https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458808
# <any puppetmaster>: <code>puppet-merge</code>
# <any cumin master>: <code>sudo cumin 'A:cp-esams' 'run-puppet-agent -q'</code>
# SAL Log using the following <code>!log Traffic: route esams caches to codfw</code>


GeoDNS (User-facing) Routing:
''Example Patch:'' [mediawiki-config] {{gerrit|635411}} cirrus: Temporarily hardcode more_like query routing


# gerrit: C+2 and Submit commit https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458806
This mitigation should be left in place for 24 hours following the switchover (equivalent to the cache length), at which point there is no longer any performance penalty to removing the hardcoding.
# <any authdns node>: authdns-update
# SAL Log using the following <code>!log Traffic: depool eqiad from user traffic</code>


==== Switchback ====
===== One day after datacenter switch =====


Same procedures as above, with reversions of the commits specified. First reverting the inter-cache routing, then user routing. Respective changes:
Revert the earlier patch to hardcode more_like query routing; this will allow these queries to route to the newly active DC, and there will not be any performance degradation since the caches have been fully populated by this point.
[https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458809/ Inter-Cache Routing], [https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458807 GeoDNS].


==== Dashboards ====
==== Dashboards ====
*[https://grafana.wikimedia.org/dashboard/db/load-balancers?orgId=1 Load Balancers]
* [https://grafana.wikimedia.org/dashboard/db/elasticsearch-percentiles-prometheus?orgId=1 ElasticSearch Percentiles]
*[https://grafana.wikimedia.org/dashboard/db/frontend-traffic?refresh=1m&orgId=1 Frontend traffic]
*[https://grafana.wikimedia.org/dashboard/db/prometheus-varnish-dc-stats?orgId=1&var-datasource=eqiad%20prometheus%2Fops&var-cluster=cache_upload&var-layear-layer=backend Varnish eqiad]
*[https://grafana.wikimedia.org/dashboard/db/prometheus-varnish-dc-stats?orgId=1&var-datasource=codfw%20prometheus%2Fops&var-cluster=cache_upload&var-layer=backend Varnish codfw]


=== Traffic - Services ===
=== Traffic ===
It is relatively straightforward for us to depool an entire datacenter at the traffic level, and is regularly done during maintenance or outages. For that reason, we tend to only keep the datacenter depooled for about a week, which allows us to test for a full traffic cycle (in theory).


For reference, the public-facing services involved which are confirmed active/active or failover-capable (other than MW and Swift, handled elsewhere):
==== General information on generic procedures ====
* cache_text:
** restbase (active/passive for now)
** eventstreams (active/active)
** cxserver (active/active)
** noc (active/active)
** pybal_config (active/active)
** wdqs (active/active)
** ores (active/active)


* cache_upload:
See [[Global traffic routing]].
** kartotherian (active/active) - aka maps


==== Switchover ====
==== Switchover ====


* Set temporary active/active for active/passive services above:
GeoDNS (User-facing) Routing:
# gerrit: C+2 and Submit commit https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458802
 
# <any frontend puppetmaster>: <code>puppet-merge</code>
# gerrit: C+2 and Submit commit https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458806
# <any cumin master>: <code>sudo cumin 'A:cp-text_eqiad or A:cp-text_codfw' 'run-puppet-agent'</code>
# <any authdns node>: authdns-update
# SAL Log using the following <code>!log Traffic: set services active/active</code>
# SAL Log using the following <code>!log Traffic: depool eqiad from user traffic</code>
* The above must complete correctly and fully (applying the change)
* Set all active/active (including temps above) to active/passive in codfw only:
# gerrit: C+2 and Submit commit https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458803
# <any frontend puppetmaster>: <code>puppet-merge</code>
# <any cumin master>: <code>sudo cumin '(A:cp-text or A:cp-upload) and (A:eqiad or A:codfw)' 'run-puppet-agent'</code>
# SAL Log using the following <code>!log Traffic: set services active/passive in codfw only</code>


==== Switchback ====
==== Switchback ====


Reverse the above with reverted commits, https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458804 and https://gerrit.wikimedia.org/r/#/c/operations/puppet/+/458805 respectively
Same procedure as above, with reversion of the commit specified: [https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458807 GeoDNS].


==== Dashboards ====
==== Dashboards ====
*[https://grafana.wikimedia.org/dashboard/db/eventstreams?refresh=1m&orgId=1 EventStreams]
*[https://grafana.wikimedia.org/d/000000343/load-balancers-lvs?orgId=1 Load Balancers]
*[https://grafana.wikimedia.org/dashboard/db/ores?refresh=1m&orgId=1 ORES]
*[https://grafana.wikimedia.org/d/000000479/frontend-traffic?refresh=1m&orgId=1&var-site=codfw&var-site=eqiad&var-cache_type=text&var-status_type=1&var-status_type=2&var-status_type=3&var-status_type=4 Frontend traffic (text@eqiad/codfw)]
*[https://grafana.wikimedia.org/dashboard/db/maps-performances?orgId=1 Maps]
*[https://grafana.wikimedia.org/d/000000479/frontend-traffic?refresh=1m&orgId=1&var-site=codfw&var-site=eqiad&var-cache_type=upload&var-status_type=1&var-status_type=2&var-status_type=3&var-status_type=4 Frontend traffic (upload@eqiad/codfw)]
*[https://grafana.wikimedia.org/dashboard/db/wikidata-query-service?refresh=1m WDQS]


=== Services ===
=== Services ===
Line 206: Line 189:
# restore the original TTL
# restore the original TTL


* All of the above is done using the sre.switchdc.services cookbooks
* All of the above is done using the <code>sre.switchdc.services</code> cookbooks:
<syntaxhighlight lang="bash">
# Switch the service "parsoid" to codfw-only
$ cookbook sre.switchdc.services --services parsoid -- eqiad codfw
# Switch all active-active services to codfw, excluding parsoid and cxserver
$ cookbook sre.switchdc.services --exclude parsoid cxserver -- eqiad codfw
</syntaxhighlight>


Restbase is a bit of a special case, and needs an additional step, if we're just switching active traffic over and not simulating a complete failover:
Restbase is a bit of a special case, and needs an additional step, if we're just switching active traffic over and not simulating a complete failover:


# pool restbase-async everywhere, then depool restbase-async in the newly active dc, so that async traffic is separated from real-users traffic as much as possible.
# pool restbase-async everywhere, then depool restbase-async in the newly active dc, so that async traffic is separated from real-users traffic as much as possible.
==== Dashboards ====
*[https://grafana.wikimedia.org/dashboard/db/eventstreams?refresh=1m&orgId=1 EventStreams]
*[https://grafana.wikimedia.org/dashboard/db/ores?refresh=1m&orgId=1 ORES]
*[https://grafana.wikimedia.org/dashboard/db/maps-performances?orgId=1 Maps]
*[https://grafana.wikimedia.org/dashboard/db/wikidata-query-service?refresh=1m WDQS]


=== Other miscellaneous ===
=== Other miscellaneous ===
Line 217: Line 212:
* [[Irc.wikimedia.org|IRC]], <s>[[RCStream]]</s>, [[EventStreams]]
* [[Irc.wikimedia.org|IRC]], <s>[[RCStream]]</s>, [[EventStreams]]


== Schedule of past switches ==
== Upcoming and past switches ==
{{Anchor|Schedule of past switches}}


=== Schedule for 2017 switch ===
=== 2021 switches ===
{{See|See also "[https://blog.wikimedia.org/2017/04/18/codfw-temporary-editing-pause/ Editing pause for failover test]" blog post (18 April 2017), on the Wikimedia Blog.}}
{{tracked|T281515}}
 
;Schedule
* Services: [https://zonestamp.toolforge.org/1624888854 Monday, June 28th, 2021 14:00 UTC]
* Traffic: [https://zonestamp.toolforge.org/1624892434 Monday, June 28th, 2021 15:00 UTC]
* MediaWiki: [https://zonestamp.toolforge.org/1624975258 Tuesday, June 29th, 2021 14:00 UTC]
;Reports
* [https://techblog.wikimedia.org/2021/07/23/june-2021-data-center-switchover/ June 2021 Data Center Switchover] on the Wikimedia Tech blog
*[https://lists.wikimedia.org/hyperkitty/list/wikitech-l@lists.wikimedia.org/message/XI57Z6T2DK7IC345VFTENM5RLTQBQDEQ/ Services and Traffic] on wikitech-l
* [https://lists.wikimedia.org/hyperkitty/list/wikitech-l@lists.wikimedia.org/message/ENL3P5SA7RSOHPN4ILMXQ2BGBF5XR776/ MediaWiki] on wikitech-l (1m57s of read-only time)
* [[Incident documentation/2021-06-29 trwikivoyage primary db]]
 
'''Switching back:'''
 
{{Tracked|T287539}}
* Services: Monday, Sept 13th 14:00 UTC
*Traffic: Monday, Sept 13th 15:00 UTC
*MediaWiki: Tuesday, Sept 14th 14:00 UTC
 
=== 2020 switches ===
{{tracked|T243314}}
;Schedule
* Services: Monday, August 31st, 2020 14:00 UTC
* Traffic: Monday, August 31st, 2020 15:00 UTC
* MediaWiki: Tuesday, September 1st, 2020 14:00 UTC
;Reports
* [[Incident documentation/2020-09-01 data-center-switchover]] (2m49s of read-only time)
 
'''Switching back:'''
* Traffic: Thursday, September 17th, 2020 17:00 UTC
* MediaWiki: Tuesday, October 27th, 2020 14:00 UTC
* Services: Wednesday, October 28th, 2020 14:00 UTC
 
=== 2018 switches ===
{{tracked|T199073}}
;Schedule
* Services: Tuesday, September 11th 2018 14:30 UTC
*Media storage/Swift: Tuesday, September 11th 2018 15:00 UTC
*Traffic: Tuesday, September 11th 2018 19:00 UTC
*MediaWiki: Wednesday, September 12th 2018: 14:00 UTC
;Reports
* [https://lists.wikimedia.org/hyperkitty/list/wikitech-l@lists.wikimedia.org/message/LU63AEQYJDWRN4PL6OHFLT5ENMQBVFMW/ Datacenter Switchover recap] (7m34s of read-only time)
 
'''Switching back:'''
;Schedule
* Traffic: Wednesday, October 10th 2018 09:00 UTC
*MediaWiki: Wednesday, October 10th 2018: 14:00 UTC
*Services: Thursday, October 11th 2018 14:30 UTC
*Media storage/Swift: Thursday, October 11th 2018 15:00 UTC
;Reports
* [https://lists.wikimedia.org/hyperkitty/list/wikitech-l@lists.wikimedia.org/message/YSAZEXIMF73OA3OBC4Z4SYJKC6I4EWJH/ Datacenter Switchback recap] (4m41s of read-only time)


[[phab:T138810|T138810]] on Phabricator tracks tasks to be undertaken during the 2017 switch.
=== 2017 switches ===
{{tracked|T138810}}


;Schedule
* Elasticsearch: elasticsearch is automatically following mediawiki switch
* Elasticsearch: elasticsearch is automatically following mediawiki switch
* Services: Tuesday, April 18th 2017 14:30 UTC
* Services: Tuesday, April 18th 2017 14:30 UTC
Line 230: Line 278:
* MediaWiki: Wednesday, April 19th 2017 [https://www.timeanddate.com/worldclock/fixedtime.html?iso=20170419T14 14:00 UTC] (user visible, requires read-only mode)
* MediaWiki: Wednesday, April 19th 2017 [https://www.timeanddate.com/worldclock/fixedtime.html?iso=20170419T14 14:00 UTC] (user visible, requires read-only mode)
* Deployment server: Wednesday, April 19th 2017 16:00 UTC
* Deployment server: Wednesday, April 19th 2017 16:00 UTC
;Reports
* [https://blog.wikimedia.org/2017/04/18/codfw-temporary-editing-pause/ Editing pause for failover test] on Wikimedia Blog
*


'''Switching back:'''
'''Switching back:'''
;Schedule
* Traffic: Pre-switchback in two phases: Mon May 1 and Tue May 2 (to avoid cold-cache issues Weds)
* Traffic: Pre-switchback in two phases: Mon May 1 and Tue May 2 (to avoid cold-cache issues Weds)
* MediaWiki:  Wednesday, May 3rd 2017 [https://www.timeanddate.com/worldclock/fixedtime.html?iso=20170503T14 14:00 UTC] (user visible, requires read-only mode)
* MediaWiki:  Wednesday, May 3rd 2017 [https://www.timeanddate.com/worldclock/fixedtime.html?iso=20170503T14 14:00 UTC] (user visible, requires read-only mode)
Line 238: Line 290:
* Swift: Thursday, May 4th 2017 15:30 UTC
* Swift: Thursday, May 4th 2017 15:30 UTC
* Deployment server: Thursday, May 4th 2017 16:00 UTC
* Deployment server: Thursday, May 4th 2017 16:00 UTC
;Reports
* [[Incident documentation/2017-05-03 missing index]]
* [[Incident documentation/2017-05-03 x1 outage]]


=== Schedule for 2016 switch ===
=== 2016 switches ===
{{See|See also "[https://blog.wikimedia.org/2016/04/11/wikimedia-failover-test/ Wikimedia failover test]" blog post (11 April 2016), on the Wikimedia Blog.}}
;Schedule
* Deployment server: Wednesday, January 20th 2016
* Deployment server: Wednesday, January 20th 2016
* Traffic: Thursday, March 10th 2016
* Traffic: Thursday, March 10th 2016
Line 248: Line 303:
* Services: Monday, April 18th 2016, 10:00 UTC
* Services: Monday, April 18th 2016, 10:00 UTC
* MediaWiki: Tuesday, April 19th 2016, 14:00 UTC / 07:00 PDT / 16:00 CEST (requires read-only mode)
* MediaWiki: Tuesday, April 19th 2016, 14:00 UTC / 07:00 PDT / 16:00 CEST (requires read-only mode)
;Reports
* [https://blog.wikimedia.org/2016/04/11/wikimedia-failover-test/ Wikimedia failover test] on Wikimedia Blog


'''Switching back:'''
'''Switching back:'''

Revision as of 17:21, 3 August 2021

Introduction

A datacenter switchover (from eqiad to codfw, or vice-versa) comprises switching over multiple different components, some of which can happen independently and many of which need to happen in lockstep. This page documents all the steps needed to switch over from a master datacenter to another one, broken up by component. SRE Service Operations maintains the process and software necessary to run the switchover.

Weeks in advance preparation

  • 10 weeks before: Coordinate dates and communication plan with involved groups: Switch_Datacenter/Coordination
  • 3 weeks before: Run a "live test" of the cookbooks by "switching" from the passive DC to the active DC. The --live-test flag will skip actions that could harm the active DC or do them on the passive DC. This will instrument most of the code paths used in the switchover and help identify issues. This process will !log to SAL so you should coordinate with others, but otherwise should be non-disruptive. Due to changes since the last switchover you can expect code changes to become necessary, so take the time and assistance needed into account.

Overall switchover flow

In a controlled switchover we first deactivate services in the primary datacenter and second deactivate caching in the datacenter. The next step is to switch Mediawiki itself. About a week later we activate caching in the datacenter again, as we believe that testing the situation without caching in the datacenter is sufficient.

Typical scheduling looks like:

  • Monday 14:00 UTC Services
  • Monday 15:00 UTC Caching (traffic)
  • Tuesday 14:00 UTC Mediawiki

The following week reactivate caching. 6+ Weeks later switchback Mediawiki

Per-service switchover instructions

MediaWiki

We divide the process in logical phases that should be executed sequentially. Within any phase, top-level tasks can be executed in parallel to each other, while subtasks are to be executed sequentially to each other. The phase number is referred to in the names of the tasks in the operations/cookbooks repository, in the cookbooks/sre/switchdc/mediawiki/ path.


Days in advance preparation

  1. OPTIONAL: SKIP IN AN EMERGENCY: Make sure databases are in a good state. Normally this requires no operation, as the passive datacenter databases are always prepared to receive traffic, so there are no actionables. Some things that #DBAs normally should make sure for the most optimal state possible (sanity checks):
    • There is no ongoing long-running maintenance that affects database availability or lag (schema changes, upgrades, hardware issues, etc.). Depool those servers that are not ready.
    • Replication is flowing from eqiad -> codfw and from codfw -> eqiad (replication is usually stopped in the passive -> active direction to facilitate maintenance)
    • All database servers have its buffer pool filled up. This is taken care automatically with the automatic buffer pool warmup functionality. For sanity checks, some sample load could be sent to the MediaWiki application server to check requests happen as quickly as in the active datacenter.
    • These were the things we prepared/checked for the 2018 switch
  2. Make absolutely sure that parsercache replication is working from the active to the passive DC. This is important
  3. Check appserver weights on servers in the passive DC, make sure that newer hardware is weighted higher (usually 30) and older hardware is less (usually 25)

Phase 0 - preparation

  1. Disable puppet on maintenance hosts in both eqiad and codfw: 00-disable-puppet.py
  2. Reduce the TTL on appservers-ro, appservers-rw, api-ro, api-rw, jobrunner, videoscaler, parsoid-php to 10 seconds: 00-reduce-ttl.py The warmup step (below) typically takes longer than the old TTL (5 minutes) so this step doesn't wait it to expire. Make sure that at least 5 minutes have passed before moving to Phase 1, the cookbook should force you to wait.
  3. Warm up APC running the mediawiki-cache-warmup on the new site clusters. The warmup queries will repeat automatically until the response times stabilize: 00-warmup-caches.py
    • The global "urls-cluster" warmup against the appservers cluster
    • The "urls-server" warmup against all hosts in the appservers cluster.
    • The "urls-server" warmup against all hosts in the api-appservers cluster.
  4. Set downtime for Read only checks on mariadb masters changed on Phase 3 so they don't page. This is not covered by the switchdc script.

Phase 1 - stop maintenance

  1. Stop maintenance jobs in both datacenters and kill all the periodic jobs (systemd timers and cronjobs) on all maintenance host in both datacenters: 01-stop-maintenance.py

Phase 2 - read-only mode

  1. Go to read-only mode by changing the ReadOnly conftool value: 02-set-readonly.py

Phase 3 - lock down database masters

  1. Put old-site core DB masters (shards: s1-s8, x1, es4-es5) in read-only mode and wait for the new site's databases to catch up replication: 03-set-db-readonly.py

Phase 4 - switch active datacenter configuration

  1. Switch the discovery records and MediaWiki active datacenter: 04-switch-mediawiki.py
    • Flip appservers-ro, appservers-rw, api-ro, api-rw, jobrunner, videoscaler, parsoid-php to pooled=true in the new site. Since both sites are now pooled in etcd, this will not actually change the DNS records for the active datacenter.
    • Flip WMFMasterDatacenter from the old site to the new.
    • Flip appservers-ro, appservers-rw, api-ro, api-rw, jobrunner, videoscaler, parsoid-php to pooled=false in the old site. After this, DNS will be changed for the old DC and internal applications (except mediawiki) will start hitting the new DC

Phase 5 - Invert Redis replication for MediaWiki sessions

  1. Invert the Redis replication for the sessions cluster: 05-invert-redis-sessions.py

Phase 6 - Set new site's databases to read-write

  1. Set new-site's core DB masters (shards: s1-s8, x1, es4-es5) in read-write mode: 06-set-db-readwrite.py

Phase 7 - Set MediaWiki to read-write

  1. Go to read-write mode by changing the ReadOnly conftool value: 07-set-readwrite.py

Phase 8 - post read-only

  1. Restart Envoy on the jobrunners that are now inactive, to trigger changeprop to re-resolve the DNS name and connect to the new DC: 08-restart-envoy-on-jobrunners.py
    • A steady rate of 500s is expected until this step is completed, because changeprop will still be sending edits to jobrunners in the old DC, where the database master will reject them.
  2. Start maintenance in the new DC: 08-start-maintenance.py
    • Run puppet on the maintenance hosts, which will reactivate systemd timers in both datacenters and add cronjobs in the primary DC
    • Most Wikidata-editing bots will restart once this is done and the "dispatch lag" has recovered. This should bring us back to 100% of editing traffic.
  3. Update tendril for new database masters: 08-update-tendril.py
    • Pure cosmetic change, no effect on production. No changes required for database zarcillo (which has a different master for eqiad and codfw).
    • The parsercache hosts and x2 will need to manually be updated in tendril see T266723. This is not covered by the switchdc script.
  4. Set the TTL for the DNS records to 300 seconds again: 08-restore-ttl.py
  5. Update DNS records for new database masters deploying eqiad->codfw; codfw->eqiad This is not covered by the switchdc script. Please use the following to SAL log !log Phase 8.5 Update DNS records for new database masters
  6. Run Puppet on the database masters in both DCs, to update expected read-only state: 08-run-puppet-on-db-masters.py.
  7. Make sure the CentralNotice banner informing users of readonly is removed. Keep in mind, there is some minor HTTP caching involved (~5mins)
  8. Remove the downtime added in phase 0.
  9. Update disc_desired_state.py to reflect which services are pooled in which DCs. See T286231 as an example. This is not covered by the switchdc script.

Phase 9 - verification and troubleshooting

This is not covered by the switchdc script

  1. Make sure reading & editing works! :)
  2. Make sure recent changes are flowing (see Special:RecentChanges, EventStreams, and the IRC feeds)
  3. Make sure email works (exim4 -bp on mx1001/mx2001, test an email)

Dashboards

Media storage/Swift

Switchover

Cache-wise, Swift is active-active. However the background synchronization swiftrepl needs to run in what Mediawiki considers the primary datacenter. A patch such as 622522 accomplishes this and needs to be merged after Mediawiki has been switched over (up to e.g. 24/48 hours later is acceptable)

Switching back

Revert 622522 to move swiftrepl back to eqiad

Dashboards

ElasticSearch

General context on how to switchover

CirrusSearch talks by default to the local datacenter ($wmfDatacenter). If Mediawiki switches datacenter, elasticsearch will automatically follow.

Manually switching CirrusSearch to a specific datacenter can always be done. Point CirrusSearch to codfw by editing wmgCirrusSearchDefaultCluster InitialiseSettings.php.

To ensure coherence in case of lost updates, a reindex of the pages modified during the switch can be done by following Recovering from an Elasticsearch outage / interruption in updates.

Preserving more_like query cache performance

CirrusSearch has a caching layer that caches the result of Elasticsearch queries such as "more like this" queries (which are used, among other things, to generate "Related Articles" at the bottom of mobile Wikipedia pages).

Switching datacenters will result in degraded performance while the cache fills back up.

In order to avoid the aforementioned performance degradation, a mitigation should be deployed that will hardcode more_like queries to keep routing to the "old" datacenter for 24 hours following the switchover.

Hardcoding the cirrus cluster will allow the stampede of cache misses to be sent to the secondary search cluster which has enough capacity, once typical traffic has migrated to the new datacenter, to serve the increased load.

This hardcoding should be deployed in advance of the switchover. Since it is effectively a no-op until the actual cutover, it can be deployed as far in advance as desired.

For example, if we are switching over from eqiad to codfw, more_like queries should be hardcoded to route to eqiad; this change should be deployed before the actual cutover.

Then, 24 hours after the cutover, the hardcoding can be removed, allowing more_like queries to route to the new cirrus dc - in this example, codfw.

Days in advance preparation

Deploy a patch to hardcode more_like query routing to the currently active DC (i.e. the datacenter we are switching over from).

Example Patch: [mediawiki-config] 635411 cirrus: Temporarily hardcode more_like query routing

This mitigation should be left in place for 24 hours following the switchover (equivalent to the cache length), at which point there is no longer any performance penalty to removing the hardcoding.

One day after datacenter switch

Revert the earlier patch to hardcode more_like query routing; this will allow these queries to route to the newly active DC, and there will not be any performance degradation since the caches have been fully populated by this point.

Dashboards

Traffic

It is relatively straightforward for us to depool an entire datacenter at the traffic level, and is regularly done during maintenance or outages. For that reason, we tend to only keep the datacenter depooled for about a week, which allows us to test for a full traffic cycle (in theory).

General information on generic procedures

See Global traffic routing.

Switchover

GeoDNS (User-facing) Routing:

  1. gerrit: C+2 and Submit commit https://gerrit.wikimedia.org/r/#/c/operations/dns/+/458806
  2. <any authdns node>: authdns-update
  3. SAL Log using the following !log Traffic: depool eqiad from user traffic

Switchback

Same procedure as above, with reversion of the commit specified: GeoDNS.

Dashboards

Services

All services, are active-active in DNS discovery, apart from restbase, that needs special treatment. The procedure to fail over to one site only is the same for every one of them:

  1. reduce the TTL of the DNS discovery records to 10 seconds
  2. depool the datacenter we're moving away from in confctl / discovery
  3. restore the original TTL
  • All of the above is done using the sre.switchdc.services cookbooks:
# Switch the service "parsoid" to codfw-only
$ cookbook sre.switchdc.services --services parsoid -- eqiad codfw
# Switch all active-active services to codfw, excluding parsoid and cxserver
$ cookbook sre.switchdc.services --exclude parsoid cxserver -- eqiad codfw

Restbase is a bit of a special case, and needs an additional step, if we're just switching active traffic over and not simulating a complete failover:

  1. pool restbase-async everywhere, then depool restbase-async in the newly active dc, so that async traffic is separated from real-users traffic as much as possible.

Dashboards

Other miscellaneous

Upcoming and past switches

2021 switches

Schedule
Reports

Switching back:

  • Services: Monday, Sept 13th 14:00 UTC
  • Traffic: Monday, Sept 13th 15:00 UTC
  • MediaWiki: Tuesday, Sept 14th 14:00 UTC

2020 switches

Schedule
  • Services: Monday, August 31st, 2020 14:00 UTC
  • Traffic: Monday, August 31st, 2020 15:00 UTC
  • MediaWiki: Tuesday, September 1st, 2020 14:00 UTC
Reports

Switching back:

  • Traffic: Thursday, September 17th, 2020 17:00 UTC
  • MediaWiki: Tuesday, October 27th, 2020 14:00 UTC
  • Services: Wednesday, October 28th, 2020 14:00 UTC

2018 switches

Schedule
  • Services: Tuesday, September 11th 2018 14:30 UTC
  • Media storage/Swift: Tuesday, September 11th 2018 15:00 UTC
  • Traffic: Tuesday, September 11th 2018 19:00 UTC
  • MediaWiki: Wednesday, September 12th 2018: 14:00 UTC
Reports

Switching back:

Schedule
  • Traffic: Wednesday, October 10th 2018 09:00 UTC
  • MediaWiki: Wednesday, October 10th 2018: 14:00 UTC
  • Services: Thursday, October 11th 2018 14:30 UTC
  • Media storage/Swift: Thursday, October 11th 2018 15:00 UTC
Reports

2017 switches

Schedule
  • Elasticsearch: elasticsearch is automatically following mediawiki switch
  • Services: Tuesday, April 18th 2017 14:30 UTC
  • Media storage/Swift: Tuesday, April 18th 2017 15:00 UTC
  • Traffic: Tuesday, April 18th 2017 19:00 UTC
  • MediaWiki: Wednesday, April 19th 2017 14:00 UTC (user visible, requires read-only mode)
  • Deployment server: Wednesday, April 19th 2017 16:00 UTC
Reports

Switching back:

Schedule
  • Traffic: Pre-switchback in two phases: Mon May 1 and Tue May 2 (to avoid cold-cache issues Weds)
  • MediaWiki: Wednesday, May 3rd 2017 14:00 UTC (user visible, requires read-only mode)
  • Elasticsearch: elasticsearch is automatically following mediawiki switch
  • Services: Thursday, May 4th 2017 14:30 UTC
  • Swift: Thursday, May 4th 2017 15:30 UTC
  • Deployment server: Thursday, May 4th 2017 16:00 UTC
Reports

2016 switches

Schedule
  • Deployment server: Wednesday, January 20th 2016
  • Traffic: Thursday, March 10th 2016
  • MediaWiki 5-minute read-only test: Tuesday, March 15th 2016, 07:00 UTC
  • Elasticsearch: Thursday, April 7th 2016, 12:00 UTC
  • Media storage/Swift: Thursday, April 14th 2016, 17:00 UTC
  • Services: Monday, April 18th 2016, 10:00 UTC
  • MediaWiki: Tuesday, April 19th 2016, 14:00 UTC / 07:00 PDT / 16:00 CEST (requires read-only mode)
Reports

Switching back:

  • MediaWiki: Thursday, April 21st 2016, 14:00 UTC / 07:00 PDT / 16:00 CEST (requires read-only mode)
  • Services, Elasticsearch, Traffic, Swift, Deployment server: Thursday, April 21st 2016, after the above is done

Monitoring Dashboards

Aggregated list of interesting dashboards