You are browsing a read-only backup copy of Wikitech. The live site can be found at wikitech.wikimedia.org
Difference between revisions of "SRE/Dc-operations/Platform-specific documentation/Atlas Anchor"
m (→Firmware Image)
|Line 3:||Line 3:|
== Initial Setup Directions ==
== Initial Setup Directions ==
Revision as of 12:17, 26 August 2021
SRE Data Center Operations
Initial Setup Directions
NOTE: Instructions relate to the RIPE Atlas Anchor v3 (PC Engines APU.2E2 Hardware), which is the latest version at time of writing.
- Connect port eth0 to switch port configured in Netbox (Cat-5E / copper link, 1000Base-T switch or copper SFP).
- Connect DB9 Console port to OpenGear SCS port defined in Netbox (DB9 -> RJ45 cable).
NOTE: Examples on this page are for Linux based systems, and may need adjusting in other environments.
1. Get Device Image from RIPE (netops)
Every Atlas anchor requires a device-specific firmware image prepared for it by the RIPE NCC. These images are pre-built with all IP addressing required, which we must supply to RIPE when requesting to host a new Anchor (or replacing an existing one).
- Netops can take care of this task.
- Requests for new or replacement anchors can be done via https://atlas.ripe.net/anchors/apply/
- RIPE supply download link after request is approved via email.
2. Download Device Image to Local Machine
Downloaded firmware images should be placed in /srv/firmware/ on apt1001.wikimedia.org. You should SSH to this machine and list the files in that directory to identify the name of the required image:
cmooney@apt1001:~$ ls -lahtr /srv/firmware/ total 8.6G -rw-r--r-- 1 root root 0 Feb 19 2014 index.html -rw-r--r-- 1 root root 41M Jul 13 2016 SAS-RAID_Firmware_4CGCG_LN_25.4.1.0004_A07.BIN -rw-r--r-- 1 root root 115M Nov 10 2016 iDRAC-with-Lifecycle-Controller_Firmware_XTPX4_LN_126.96.36.199_A00.BIN -rw-r--r-- 1 root root 4.7G Aug 31 2017 HP.SPP.881936_001_spp-2017.07.1-SPP2017071.2017_0718.11.iso -rwxr-xr-x 1 robh wikidev 17M Aug 31 2017 hp.ilo4_254.bin -rw-r--r-- 1 faidon wikidev 954M Oct 26 2017 anchor.sg-sin-as14907.img -rw-r--r-- 1 faidon wikidev 92 Oct 26 2017 anchor.sg-sin-as14907.img.sha256 -rw-r--r-- 1 root root 954M Nov 7 2017 anchor.nl-ams-as14907.img -rw-r--r-- 1 root root 92 Nov 7 2017 anchor.nl-ams-as14907.img.sha256 -rw-r--r-- 1 root root 6.0M Jan 10 2018 firmware-smartarray-ea3138d8e8-6.06.tar.gz -rw-r--r-- 1 filippo wikidev 6.1M Apr 23 2018 firmware-smartarray-ea3138d8e8-6.30.tgz -rw-r--r-- 1 root root 6.1M Jan 16 2019 firmware-smartarray-ea3138d8e8-6.60-1.1.x86_64.tgz -rw-r--r-- 1 root root 6.2M Jul 3 2019 firmware-smartarray-ea3138d8e8-6.88-1.1.x86_64.tgz -rw-r--r-- 1 root root 64 Nov 21 2019 anchor.nl-ams-as14907-v2.img.sha256 -rw-r--r-- 1 root root 954M Nov 21 2019 anchor.nl-ams-as14907-v2.img drwxr-xr-x 12 root root 4.0K Apr 3 2020 .. -rw-r--r-- 1 root root 64 Aug 17 10:00 anchor.us-dal-as14907-v3.img.sha256 -rw-r--r-- 1 root root 954M Aug 17 10:00 anchor.us-dal-as14907-v3.img drwxr-xr-x 2 root root 4.0K Aug 17 13:06 . cmooney@apt1001:~$
The image should be downloaded to your local laptop using scp or other SSH-based mechanism (sftp, rsync etc). For instance if the file we want is "anchor.us-dal-as14907-v3.img" then run this command
cmooney@wikilap:~$ scp email@example.com:/srv/firmware/anchor.us-dal-as14907-v3.img . anchor.us-dal-as14907-v3.img 0% 3456KB 250.0KB/s 1:04:52 ETA
When complete display the saved hash value on apt1001, filename is the same with ".sha256" added:
cmooney@apt1001:~$ more /srv/firmware/anchor.us-dal-as14907-v3.img.sha256 e4689be071861a0557bde92acb48ec81aad20305684d17995a45b060a3dc80b2 cmooney@apt1001:~$
The value should match the hash calculated from the downloaded image:
cmooney@wikilap:~$ sha256sum anchor.us-dal-as14907-v3.img e4689be071861a0557bde92acb48ec81aad20305684d17995a45b060a3dc80b2 anchor.us-dal-as14907-v3.img
3. Prepare USB Drive
This step requires a USB drive, larger than the image file itself (2GB+ should be ok). Note all data on the drive will be erased by the operation!
1. Identify USB device
After inserting the disk to your machine you need to identify the Linux device name that has been assigned to it. There are multiple ways to do this, one good way to start is to use 'lsblk':
cmooney@wikilap:~$ sudo lsblk | grep disk sdb 8:0 1 3.7G 0 disk nvme0n1 259:0 0 477G 0 disk
In my case above the USB drive is "sdb". It's fairly easy to identify because of the size. Be very careful on this point however, if in any doubt double-check or seek support, as the next operation will erase the contents of the device.
2. Unmount filesystems if needed
Unmount any filesystems on the USB drive that might be in use / have auto-mounted:
cmooney@wikilap:~$ sudo umount -v /dev/sdb* umount: /dev/sdb: not mounted. umount: /media/cmooney/c5b4171c-85d2-4dd3-ae55-96d37677e7b0 (/dev/sdb1) unmounted
3. Write image
To write the image to the identified disk we can use the 'dd' command:
cmooney@wikilap:~$ sudo dd if=anchor.us-dal-as14907-v3.img of=/dev/sda status=progress 997302784 bytes (997 MB, 951 MiB) copied, 305 s, 3.3 MB/s 1953125+0 records in 1953125+0 records out 1000000000 bytes (1.0 GB, 954 MiB) copied, 313.572 s, 3.2 MB/s cmooney@wikilap:~$ cmooney@wikilap:~$ sync cmooney@wikilap:~$
That should be it for creating the USB drive, remove from the computer.
Boot From USB to (re)Install Anchor
Installing the Anchor OS should be as easy as inserting the prepared USB device in the Anchor unit (while powered off), then restoring power to the Anchor.
The console output should be monitored during this process (netops?) to validate things are going ok, but it is a fully automatic process. Instructions can be found here, under "Install the Software": https://atlas.ripe.net/docs/anchor-installation/
TODO: Update after installing codfw replacement Anchor based on what this actually looks like.
Validate System is Online (netops)
When the device install process is finished the associated switch port should show up/up with a MAC address learnt on it. Device allocated IPs should be pingable.
Once this becomes visible to RIPE they will send us an email to confirm, and it should be publicly visible (at https://atlas.ripe.net/anchors/list/).
TODO: Update this after install in codfw.